New Energy Battery Industry News and Exhibition Updates

Global layout

+86 769 2366 8529

chen@xpower-world.com

Get a Quote

Dongguan X-Power Intelligent Technology Co.,Ltd

Online Message

60V 20Ah lithium battery for electric motorcycle

60V 20Ah lithium battery for electric motorcycle

Company News Industry News Exhibition

Why Electric Vehicles Choose to Use NCM Cells ?

Why Electric Vehicles Choose to Use NCM Cells ?

Know Detail

Basis for Selecting Golf Cart Battery Capacity

Choosing the right capacity for a golf cart battery is a critical decision that directly impacts the cart’s performance, usability, and overall operational efficiency. The core principle of capacity selection is to match the battery’s ampere-hour (Ah) rating to the specific usage requirements of the golf cart, as well as the environmental and operational conditions it will encounter. Capacity, measured in Ah, represents the amount of electrical charge the battery can store and deliver over time—higher Ah ratings mean longer runtime between charges, but they also come with trade-offs such as increased weight, higher cost, and potential compatibility issues with the cart’s electrical system. Thus, a one-size-fits-all approach is ineffective, and users must consider multiple interrelated factors to make an informed choice.First and foremost, the primary usage scenario of the golf cart is the most fundamental factor. For standard golf course use—where the cart is used to navigate 18 holes

28

2026-04
Common Faults and Solutions of Golf Cart Batteries

Golf cart batteries, as the core power source of golf carts, are prone to various faults due to long-term use, improper maintenance, or environmental factors, which directly affect the normal operation and service life of the vehicle. One of the most common faults is insufficient charging or failure to hold a charge. This problem usually manifests as the golf cart being unable to travel a normal distance after a full charge, or the power dropping rapidly during use. The main causes include sulfation of the battery plates, damage to the charging system, or loose and corroded battery terminals. Sulfation occurs when the battery is not fully charged for a long time, leading to the formation of lead sulfate crystals on the plates, which block the electrochemical reaction and reduce the battery’s capacity. To solve this, first, check the charging system to ensure the charger is working normally and the charging voltage and current meet the battery’s specifications. If sulfation is mild, use

24

2026-04
The material durability of portable power stations

The durability of portable power stations is fundamentally determined by the materials used in their construction, as these devices are frequently exposed to harsh outdoor environments, including transportation impacts, temperature fluctuations, and accidental collisions. Modern high-quality portable power stations adopt a multi-layer material structure, combining strength, impact resistance, and corrosion resistance to ensure long-term reliable operation. The outer casing, which bears the brunt of external forces, is typically made of high-strength engineering plastics such as ABS (Acrylonitrile Butadiene Styrene) or PC (Polycarbonate), often reinforced with glass fiber to enhance structural rigidity. These materials offer an excellent balance of lightweight properties and impact resistance, preventing cracks or deformation when the device is dropped from a height of 1-2 meters, which is a common scenario during outdoor use or transportation. For example, the EcoFlow DELTA Pro 3 featu

23

2026-04
The Impact of Citycoco Battery Weight on the Scooter

The weight of a Citycoco battery is a critical factor that profoundly influences the scooter’s overall performance, handling, and user experience. Citycoco scooters typically use lithium-ion or lead-acid batteries, with lithium variants weighing around 5–7 kg for a 60V 20Ah pack and lead-acid models weighing 15–20 kg for the same capacity. This weight variance directly alters the scooter’s center of gravity, which is a core determinant of stability and maneuverability. A heavier battery lowers the center of gravity, enhancing stability at high speeds and during turns, making the scooter feel more planted on the road. However, this added weight increases the scooter’s total mass, which strains the motor and reduces acceleration; a 20 kg lead-acid battery can slow 0–30 km/h acceleration by 1–2 seconds compared to a 6 kg lithium equivalent.Battery weight also significantly impacts the scooter’s range and energy efficiency. Heavier batteries require more power to move, so even a high-capac

22

2026-04
Citycoco Battery Overcharge Protection Mechanism

Citycoco batteries are equipped with sophisticated overcharge protection mechanisms, primarily driven by an integrated Battery Management System (BMS), to prevent damage, overheating, and safety hazards during charging. The BMS is the core component that monitors and controls the charging process in real time. It continuously measures the voltage of each individual cell in the battery pack, as well as the total pack voltage, to ensure charging stays within safe limits. For a standard 60V Citycoco lithium battery (16 series cells), the BMS is programmed to cut off charging when the total pack voltage reaches 67.2V (the maximum safe charge voltage) or when any single cell exceeds 4.2V—the critical threshold for lithium-ion cells. This precise voltage monitoring is the first line of defense against overcharging.In addition to voltage control, the BMS regulates charging current to prevent overcharging. It communicates with the charger to adjust the current output based on the batte

21

2026-04
What Are the Voltage Levels of Tricycle Batteries

The voltage level of a tricycle battery is a core parameter that directly determines the power output, speed, torque, and overall performance of the tricycle. It acts as the "power foundation" of the tricycle, and different voltage levels are designed to match various tricycle models and usage scenarios. Currently, the mainstream voltage levels of tricycle batteries on the market range from 24V to 84V, with each level having clear applicable scenarios and performance characteristics, and there is no one-size-fits-all option. Understanding these voltage levels is crucial for selecting a suitable battery and ensuring the stable operation of the tricycle.The 24V battery is the lowest voltage level among tricycle batteries, mainly used in small, low-power tricycles such as children's tricycles or ultra-light-duty代步 tricycles for short-distance use. Its biggest advantages are low cost, light weight, and easy handling, making it suitable for short rides in communities, parks, or yards. Howev

18

2026-04

Contact us

Headquarter Address：10F, Building 25, N0. 179 Fengguan, Dongshen Road, Dongguan, Guangdong

Factory Address: Building 3, Area D, Shengyang Science and Technology Industrial Park, East District of Suichuan County Industrial Park, Ji'an City, Jiangxi Province

Headquarter Telephone No.: +86 769 2366 8529

Factory Telephone No.: +86 796 6111618

Contact Person：Kevin Chen

Email Address:chen@xpower-world.com

X