Time:2026-11-17 Views:53

Proper long-term storage for months is crucial to maintain the performance and service life of e-motorcycle batteries, especially for riders who do not use e-motorcycles in off-seasons, holidays, or rainy seasons. Improper long-term storage such as full-power storage, zero-power storage, or high and low temperature storage will cause irreversible cell aging, capacity loss, and even battery scrapping. Mastering standardized monthly and long-term storage methods can keep the battery in good condition after several months of idle storage.
The first core rule of long-term battery storage is to control the storage power level. The optimal storage power of an e-motorcycle lithium battery is 60%–70%, which can balance cell activity and self-discharge loss. Do not store the battery with 100% full power for a long time; continuous high voltage will accelerate cell aging and cause battery bulging. Do not store it with low power or zero power either; excessive self-discharge will lead to over-discharge protection, resulting in cell dormancy and failure, which cannot be activated normally. For lead-acid batteries, the storage power should be maintained above 80% to avoid plate vulcanization failure.
The second key is to control storage environment and regular maintenance. The battery should be stored in a dry, ventilated, constant temperature indoor environment, avoiding humid, dusty, high-temperature, and freezing environments. The optimal storage temperature is 15℃–25℃; long-term exposure to below 0℃ or above 35℃ will damage the battery internal structure. During several months of storage, take out the battery to check the power every 30 days, and supplement power to 60%–70% if the power drops below 50%. Disconnect the battery positive and negative wires before storage to eliminate static power consumption. After long-term storage, do not use full-throttle riding immediately; perform 2–3 slow charge and discharge cycles to activate cell activity and restore normal battery performance.